RGB Color Changing LED Submersible Lights, 7 Battery Operated Multi-Color Lights with Remote Control Decoration for Aquarium/Pool/Pond (35W)

1. 7 static modes, 5 dynamic modes, including 7-color gradient, RGB gradient, RGB jump, and other color changes and jump modes, and the brightness of the light source can be adjusted.
2. The 18-key remote control can easily control and adjust the pool lighting mode, and the color mode of the pool bulb can also be changed by switching the power supply.
3. Energy-saving and easy to use, it can replace traditional 300-500W pool bulbs with Pentair Hayward lamps, offering low power consumption and easy installation.
4. Uses high-quality LED lamp beads, providing high brightness, low light degradation, uniform light, and soft illumination. The lamp body adopts an open-hole heat dissipation design to protect the light source and ensure a long lifespan.
5. Widely used in backyard pools, swimming pools, underwater lighting decoration, landscape lighting, garden lighting, garden engineering design, and public fountain plazas.

Specification:

Item Type: Pool Light.
Material: ABS
Color: As shown in the picture
Product Size: Approx. 17x7x5cm / 6.7x2.8x2.0in
Weight: Approx. 428g / 15.1oz
Voltage: 12V
Light Source: RGB
Lamp Bead Model: SMD2835
Number of Lamp Beads: 252
Lamp Holder: E27 screw
LED Lifespan: 50,000h
Suitable for: Hotel pool/aquarium/pool lighting, etc.
Remote Control Battery: 23A battery (not included)

How to Use:

1. Open the pool lampshade. 2. Place the pool light in the lampshade and connect the power supply. 3. Install the lampshade. 4. Use the remote control to operate the light.

Package List:

1 x Pool Light

1 x Remote Control (battery not included)

1 x Product Instruction Manual

1 x Remote Control Instruction Manual

Note:

1. Please allow 1-2 inch error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. Before repairing the underwater light, the power supply connecting the underwater light to the circuit breaker must be turned off.