A pair of syphon tubes with bulb-type priming pump from Rolson. Once the syphon is primed, liquid will flow until the level falls below the bottom of the inlet pipe or until the bleed valve, located on the pump bulb, is opened destroying the syphon action.
Tough moulded polythene construction
Suitable for hot and cold liquids
Temperature range –20 to +80°C
Suitable for use with most PCB etchants
May not be suitable for use with solvents such as etch-resist removers
Flow rate 6.5 litres/min
Approx. length 540mm
Supplied in pairs
Questions & answers
All you need to know about this product from our experts
No questions have been asked (yet). So you can get started as soon as you are ready!