Rosvola TDS/PH Water Electrolyzer, Rapid Quality Tester, Purity Filter, Measuring Tool for Home Testing, EU Plug

Function:

1. Simple to use: This water electrolyzer is very easy to use, providing quick testing and obvious results. It is the simplest and least expensive way to test water quality. Assess your drinking water situation. 2. Method: Take two 100-150 ml clear glasses, one containing ordinary tap water and the other mineral water or water that has been thoroughly purified (pure or distilled water), and place them side by side on the table. Place the ends of the installed electrolyzer into each of the two glasses and plug in the power supply. Press the electrolyzer's power switch to ON to start. After about 30 seconds, turn off the electrolyzer and remove it.

3. Operating Principle: The water electrolyzer is an electric field placed in the water, composed of positive and negative electrodes (iron rods and aluminum rods). After energizing the system, positively charged ions are released from the iron rod, and the negative electrolyte ions in the water react, generating insoluble metal clumps. This process also promotes the cohesion and adsorption of the water colloid, organic matter, and inorganic substances. 4. Water Quality Test: When an electric current is applied, dissolved metal particles in the water (such as manganese, potassium, cobalt, etc.) are reduced and accumulate in metal clumps. Different metal ions exhibit varying colors, resulting in a visible color separation. 5. Caution: After connecting the power supply, do not touch the electrodes, do not put your fingers in the test water, and do not allow toddlers to play with the electrolyzer. Once the electrolyzer is empty, dry the electrodes with a dry cloth and wipe the water off the iron rod with a thin piece of gauze, and store it properly.

Specification:

Item Type: Water Electrolyzer Material: ABS Weight: Approx. 158.00 g / 5.57 oz

How to Use:

1. Take two clear glass cups with a capacity of 100 to 150 milliliters each, one cup of tap water and the other cup of mineral or purified water (pure or distilled water), and place them side by side on the table. 2. Place the installed electrolyzer at both ends of the two glass cups and plug in the power. 3. Turn the electrolyzer's power switch to the ON position to start. After approximately 30 seconds, turn the electrolyzer off and remove it. Package List: 1 x Water Electrolyzer, 4 x Aluminum Rods