Rotating Incremental Encoder 2 Phase 50mm Outer Diameter Encoder for Drainage Survey DC5‑24V 400P/R

1、Full Metal Gear: The encoder's gears are high temperature resistant, wear resistant and have a strong load bearing capacity, effectively protecting the main body of the gear box motor.

2、Stainless Steel Housing: The encoder's housing is made of stainless steel, which is wear resistant, rust free and durable.

3、Stable Performance: This encoder is an excellent electronic product component with stable performance and good load-bearing capacity.

4、Small and Lightweight: The rotating incremental encoders are small, lightweight, compact, easy to install and easy to use.

5、Widely Used: The encoders are suitable for intelligent control of various drainage measurements, automatic fixed length leather automatic cutters, etc.Item Type: Rotating Incremental Encoder

Material: Stainless steel, ABS

Operating Voltage: DC5-24V

Output Mode: Push pull output F (PNP)

Encoder Outer Diameter: Approx. 50mm / 1.97in

Radial Load: ≤30N

Axial Load: ≤20N

Starting Torsion: ≤2 x 10 negative cubic N.m

Maximum Speed: 6000r/minute

Rotational Inertia: 20g/cm²

Allowable Angular Acceleration: 2 x 10 quadratic rad/S

Shock Resistance: 1000m/S².6ms

Vibration Resistance: 1000m/S².10-200Hz

Operating Temperature: -10℃-70℃

Storage Temperature: -20℃-80℃

Relative Temperature: <RH85% No frost

Protection Grade: IP501 x Rotating Incremental Encoder3 x Screw