Rule electronic for Machine of Molding by Injection KTC-300, pull, sensor of movement linear to Use general, rule of resistance for Machine of Molding under Pressure

Features 1. High compatibility, principe of the potentiometre, voltage of input of 0 to 100 % (varie according the movement). 2. Plug of type plug, practical and functional, output quiet, rod smooth. 3. Plug Hessman resistant to the oxidation, manufacturing careful. 4. Reduction of loss of signal, quality sound high definition, compatible with all the devices. 5. Rating of protection IP67 the more high, excellent protection. Specifications Item type : Sensor of movement Material : Stainless steel Stroke electric : Range + 3 mm Resolution : Analyse infinie and ininterrompue Repeat : 0,01 mm Current of operation normal of the brushes sliding : ≤ 10 μHAS Current maximum of the brushes sliding in case of fault : 10 my Resistance of insulation (500 VCC, 50 Hz) : ≥ 10 MΩ Force of insulation (500 VCA, 50 Hz) : ≤ 100 μHAS Length of the housing (HAS) : Range + 78,5 mm Stroke mechanical (B) : Range + 8 mm Load maximum of the rod of tension : 50 kg Force of work : Direction horizontal < 10 N Direction verticale ≤ 10 N Résistance aux vibrations (norme) : 5 ... 2000 Hz, Amax = 0,8 mm, amax = 20 g Résistance aux chocs standard : 50 g, 11 ms Plage de températures de fonctionnement : -60 à +150 °C Durée de vie : > 100 × 10^6 times Speed of operation maximum : 10 m/s, acceleration maximum : 10 m/s² Rating of protection : IP67 (DIN40500 / IEC529) Contents : 1 sensor of movement 1 plug 3 accessories 4 screw