S60X6 fitting for 1000L water tank - Extension rod, 40 mm diameter

Extension drain spout for 1000-liter water tanks. This accessory is specifically designed for 1000-liter plastic tanks (also called IBCs or GRVs) used for rainwater harvesting, storage, and consumption. It attaches directly to the valve of your 1000L tank with an S60X6 fitting. Features: Material: Polypropylene and polyethylene Inlet: Threaded (female) S60X6 Outlet: Extension tube - inner diameter Ø 40 mm (outer diameter Ø 46 mm) - grooved outlet Note: The outlet is not threaded. You will not be able to screw any other fittings onto the extension. Total length: 15 cm Weight: 67 g New item +1000 liter water tank fitting S60X6 - Drain spout / Extension tube with an inner diameter of Ø 40 mm (outer diameter of Ø 46 mm) This drain spout attaches directly to your tank's valve and allows you to drain your tank. Caution: The outlet is grooved, not threaded. You will not be able to screw other fittings onto the extension. IMPORTANT: Our eco range of fittings is exclusively for use with water. My tank valve must be S60X6 threaded. Also called artillery thread, the S60X6 thread is the most common in France. D1 = Valve outlet outside diameter (including threads): Between 58 and 61 mm P1 = Thread pitch: 6 mm Number of threads on the valve: Between 3 and 4. Does not fit cam valves Multicuves informs you that this item cannot be fitted to a cam valve (see opposite). The number of threads is insufficient on a cam valve and does not allow for a watertight seal. connection You will receive 2 extension cords