1/4

S60X6 fitting for 1000L water tank - Extension tube, 40 mm diameter

Of which environmental contribution £0.01 including VAT.

Product information

Description

General Description

The S60X6 fitting for a 1000-litre water tank is an essential accessory for rainwater harvesting and storage. Designed specifically for plastic tanks (also known as IBCs or GRVs), this extension attaches directly to your S60X6 tank valve, making emptying your tank easier.

Technical Specifications

Material: Polypropylene and polyethylene
Inlet: Threaded (female) S60X6
Outlet: Extension tube - inner diameter Ø 40 mm (outer diameter Ø 46 mm)
Total length: 15 cm
Weight: 67 g
Outlet: Grooved (not threaded)

Compatibility and Accessories

Only compatible with S60X6 valves
Does not fit valves with cams

Installation

To install the fitting, simply screw it onto the valve of your 1000-liter water tank. Ensure your valve is S60X6 format to guarantee a proper fit.

Use

This drain spout allows you to easily drain your tank. It is important to note that the outlet is grooved and not threaded, which prevents the attachment of other fittings.

Other information

D1 = Outer diameter of the valve outlet (including threads): Between 58 and 61 mm
P1 = Spacing between threads: 6 mm
Number of threads on the valve: Between 3 and 4
If in doubt, it is advisable to contact the seller with photos of your valve for verification.

Features

Brand
XISRENS
Length
1 cm
Width
1 cm
Height
1 cm
Material
Polyethylene

Advice from

Water butt buying guide

Cost-effective, environmentally friendly and easy to install, water butts offer a practical solution for anyone hoping to water their garden without increasing their water bill. Designed to be connected to a downpipe, water butts and underground water tanks can range from 300 to 5000 litres in capacity.

Read our guide

You are here: