Salamander TAPBOOST Single Outlet Booster Pump + 1/2"" 3-15L Water Conditioner

The Salamander TapBoost Boosts the water flow of a single outlet to 7 – 11 litres per minute, depending on incoming flow.

Salamander TapBoost has been developed to provide a solution to a mains or gravity fed single outlet suffering with poor water performance and offers a lower cost alternative to the existing mains booster pumps available including the CombiBoost and the HomeBoost

Features

Boosts water flow to a single outlet to 7 – 11 litres per minute, depending on incoming flow.
Very quiet in operation
Compact design for fitting in tight spaces
Fitted to either a hot or cold outlet
Brass ends
Inline design for easy installation

Salamander TapBoost Applications:

Bathroom sink – hot and/or cold
Kitchen sink – hot and/or cold
Bath taps and fittings
Garden tap (pump installed inside)
Toilet cistern
Dishwasher
Washing machine  Salamander Catalytic Water Conditioner 1/2"" BSP Single Point 3-25 L/min CWCOND02

Salamander Pumps Water Conditioners offer single point or whole house water supply treatment, they prevent limescale build-up, protecting your household appliances including a shower pump.

Salamander Catalytic Water Conditioners use an alloy core which changes the Calcium Carbonate from Calcite to Aragonite, there are no chemicals or salt in this process meaning that the water is also safe to drink.

Key Features
Single point or whole house water supply treatment,
Prevent limescale build-up,
Do not use chemicals or salt,
Easy to install in any orientation,
Compact design,
Environmentally friendly,
Maintenance free – no ongoing running costs,
No electrical power required,
10-year warranty, with an average lifespan of 15 years.

The Water Conditioner 300x28mm has been designed to offer whole house water supply treatment. The Water Conditioner has been manufactured with ½” BSP tapered threads at each end allowing the installer to select the correct connection to their in-coming water supply.

The Water Conditioner 300x28mm has been designed to work with flow rates of between 3 and 25 L/min and has a flow direction arrow engraved, for ease of installation for installers.
The following brass fittings are supplied: 15mm x 1/2” F (Pair) & 1 x Brass 1/2"" socket to connect the ""Tapboost"" to the ""Water Conditioner"" unless you wish to connect the pair via a bit of copper tube. ( Copper tube not supplied or PTFE Tape)