Saw bell and drill lapidaires - Saw bell diamond 110 mm, drill diamond with guide central, saw bell diamond for tiles, for the cutting of the glass, of tiles, of the ceramic, of the marb

Premium quality : our saw bell in glass with drill pilot of positioning is made of diamond high quality, a body in steel hardened solid and the surface is munie of a coating nickel, which ensures a hardness high, a protection against the rust, a protection against the corrosion, a robustness and a robustness durable

【Design of drill pilot of positioning precise】 Each saw bell for tiles is equipped of a drill pilot of positioning removable. The head of cutting of the drill pilot is also munie of a coating diamond which the makes more edge and more durable and fixed effectively the hole position of the saw bell for can cut quickly the holes.

【Size】Diameter of cutting : 110 mm, depth of cutting : 35 mm, length total : 70 mm, diameter of the rod triangular : 10 mm.

【Holes torsades and cleanly】 These bits lapidaires with coating diamond more thick make the edge of the groove more net and can cut of holes precise to bottom flat without chips on of surfaces smooth such that the tiles of ceramic, the ceramic, the glass, the marble, the granit, etc. Terrazzo. Depth of cutting up to 30 mm

【Easy to use】 the operation is simple without have need of tools of guidance special. Use the saw bell for tiles installed with the drill of positioning for positionner the hole, remove the drill of positioning after the positioning, then cut the hole directly with the saw bell for tiles. Note : not oubliez not of add of the water or of the liquid of cooling during the process of cutting To extend the service life of the saw bell diamond.

Particularite :

1) Materials high quality : made of diamond high quality, body in steel hardened solid, which ensures its high hardness and its performance durable.

2) Design unique of drilling pilot of positioning : designed with a drill pilot of positioning removable, so that this saw bell in glass can easily open the holes without the helps of other tools of guidance special.

3) Large application : can be used for cut of holes on of surfaces smooth such that the tiles of ceramic, the ceramic, the glass (except the glass hardened), the marble, the granit and the terrazzo.

Features :

Material : diamond premium quality + body in steel hardened.

Diameter of the rod triangular : 9,5 mm.

Depth of cutting : 35 mm.

Note : not oubliez not of add of the water or of the liquid of cooling during the process of cutting To extend the service life of the saw bell