Self-adhesive chimney seal – 2 m long fiberglass seal, heat-resistant up to 550 °C – 2 m x 15 mm x 3 mm

General Description

The self-adhesive fiberglass chimney seal is 2 meters long and designed for temperatures up to 550°C. It is ideally suited for use in various environments, including ovens, fireplaces, grills, smokers, vents, and cable ducts, both indoors and outdoors.

Technical Specifications

Length: 2 m

Width: 15 mm

Thickness: 3 mm

Heat resistance: up to 550 °C

Installation

To install the seal, proceed as follows:

Clean and dry the surface where the seal will be applied.

Remove the protective film from the adhesive tape.

Stick the seal to the desired surface.

Allow the seal to cure for 12 hours to ensure optimal adhesion.

Application

This seal provides excellent sealing thanks to its fiberglass material. It must be attached by friction, as with window or expansion joints. When used on a vertical surface, an additional component may be required to hold it in place.