1/4
Self-adhesive chimney seal - 2m long fiberglass seal, heat resistant up to 550°C - 2M x 15mm x 3mm
Of which environmental contribution £0.01 including VAT.
Sold by Sinocor GmbH
Product information
Description
General Description
The self-adhesive fiberglass chimney seal is 2 meters long and is designed to withstand temperatures up to 550°C. This versatile product is ideal for use with stoves, fireplaces, barbecues, smokers, flue pipes, and cable conduits, both indoors and outdoors.Technical Specifications
- Length: 2 m
- Dimensions: 15 mm x 3 mm
- Heat Resistance: Up to 550 °C
Installation
To install the seal, follow these simple steps: clean and dry the surface, peel off the protective film, apply the seal, and allow it to cure for 12 hours. It is important to note that for use on a vertical surface, an additional component may be required to hold the sealing bead in place.Use
The sealing tape is self-adhesive and should be used to secure the sealing strip. It is designed to be held in place by friction connection, as in the case of window or expansion joints. In case of excessive temperatures, the adhesive tape may dissolve.Other information
Features
- BrandTEHTUY
- Length200 cm
- Width10 mm
- MaterialFibreglass
- ColourBlack
Advice from
Washer and O ring buying guide
All plumbing or mechanical connections need to be sealed using a rigid or flexible waterproof barrier. Static and dynamic connections can be made watertight using fibre or rubber washers, O rings or lip seals, all of which need to chosen to match the type of liquid and pressure they are required to contain.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}