Self-adhesive mirror window film, thermal insulation, stained glass, silver, 90 x 100 cm

• Daytime Privacy Protection - This reflective window film provides excellent daytime privacy as the exterior glass creates a mirror effect when exterior light is more intense than interior light. Note: At night, the mirror effect is reversed and the interior is visible from the outside; so remember to draw the curtains.
• Easy to install - This self-adhesive window film, with fine glue, is very easy to install and remove. Just use a lot of water on the glass surfaces to stick it. It is easily removed by peeling off the film from one corner and spraying with plenty of water. It leaves no residue and does not damage the glass.
• UV Blocking - Blocks 95% of harmful ultraviolet rays and softens the sun's rays. Protects your skin and allows you to enjoy the sun with complete peace of mind.Also prevents furniture from fading.
• Thermal insulation - This temperature-regulating window film keeps you warm in winter and blocks heat in summer.
• Wide applications - Suitable for offices, gyms, homes, shopping malls, rental apartments, etc.

Features:

Solar window film is a real asset: it preserves your privacy, protects against heat in summer and cold in winter, reduces the glare of the sun, regulates heat and reduces temperature, and allows you to reduce your electricity bills.

Even with a large bay window, our mirror window film will offer you a warm atmosphere. As soon as the sun comes in, you will feel the cruelty of UV rays. It is therefore important to prepare for the shade.

Installation Tips:

Step 1. Keep the window or glass clean.
Step 2. Spray the window or glass with water.
Step 3. Remove the static film from the protective sheet (make sure you have removed it before applying the film to the glass).
Step 4. After installation, apply the film to the damp glass and smooth by hand.
Step 5. Remove the air bubbles and excess water with a squeegee.
Step 6. To remove, simply peel off the film from any corner. Peels off cleanly and without leaving residue.

Helpful tips:

Before sticking, remember to remove the protective film and spray with plenty of water.
Use a watering can to spray more water on the glass and the surface of the film (the more water, the better). Scrape off the air bubbles with a squeegee.
Cut the film 2mm from the window frame, take a corner, spray again, stick and scrape the bubbles.

Content:

One roll of window film
1 user manual