Self-Adhesive Non-Slip Bathroom Floor Covering Grey Brown Wood

Grey-brown wood-effect self-adhesive flooring for bathroom, 60 cm x 5 m

This roll of self-adhesive flooring is a practical solution for quickly renovating an indoor floor without major work. Thanks to its grey-brown wood-effect finish, it provides a warm and modern look while blending easily with many décor styles. Its reinforced plastic-coated surface and self-adhesive design allow for easy installation on a clean, smooth and dry floor. This adhesive flooring is particularly suitable for rooms exposed to moisture such as the bathroom, toilet or certain utility spaces.

Designed for domestic use, this floor film offers additional protection against water splashes and everyday wear. Its non-slip texture helps improve comfort of use in areas where the floor can become slippery. It is an attractive option for covering an old floor covering and refreshing a room with minimal effort.

Key features

• Self-adhesive covering easy to install
• Elegant grey-brown wood effect that is easy to match
• Thickened structure for better hold
• Water-resistant plastic-coated surface
• Non-slip property suitable for damp rooms
• Practical roll format for covering a linear surface
• Quick renovation solution for indoor flooring

Recommended uses

This self-adhesive flooring is suitable for different areas of the home when you want to modernise a floor without undertaking a complete renovation. It can be used in a bathroom, toilet, utility room, hallway, dressing room, entrance hall or other small indoor surfaces. Its wood-look design creates a warmer atmosphere than a purely technical covering, while still remaining easy to maintain on a daily basis.

It is particularly suitable for tenants or homeowners looking for a quick, clean and economical floor renovation solution. It may also be suitable for a temporary refresh or to protect an existing surface in good condition.

Product features

• Product type: self-adhesive floor sticker in roll form
• Main function: renovation and protection of indoor flooring
• Finish: wood effect
• Colour: grey-brown
• Version: reinforced thickness with improved waterproofing
• Installation: self-adhesive, with no additional glue under normal conditions of use
• Care: simple cleaning with a soft cloth or a slightly damp mop

The surface layer has been designed to offer better resistance to moisture in wet rooms. The plastic-coated adhesive covering limits surface infiltration and makes it easier to clean small everyday marks. Its grey-brown wood appearance helps visually conceal certain slight irregularities in the substrate, provided it remains generally smooth and even.

Technical parameters

• Product name: wood-effect self-adhesive flooring
• Type: self-adhesive floor film for indoor renovation
• Brand: not specified
• Model: not specified
• Material: self-adhesive plastic-coated synthetic material
• Colour: grey-brown wood effect
• Roll dimensions: 60 cm x 5 m
• Approximate coverage area: 3 m²
• Stated thickness: approximately 0,35 cm according to the data provided
• Net weight: approximately 0,7 kg
• Product length: 500 cm
• Product width: 60 cm
• Height or thickness: 0,35 cm
• Stated weight: 700 g
• Voltage: not applicable
• Power: not applicable
• Capacity: not applicable
• Installation method: direct adhesive application on prepared surface
• Compatibility: smooth, clean, dry and flat surfaces

Fitting and usage advice

To ensure good adhesion, it is recommended to prepare the surface carefully before installation. The substrate must be clean, dry, dust-free and free from grease. On old tiles or a covering with pronounced relief, the result will be better if the floor is levelled beforehand. Measure the area to be covered, cut the roll to the desired dimensions, then gradually remove the protective film while applying the covering from the centre towards the edges in order to limit the formation of air bubbles.

• Wait until the floor is completely dry before installation
• Carry out precise cutting with a suitable craft knife
• Smooth down gradually to improve adhesion
• Avoid prolonged exposure to standing water
• Do not install on a crumbly, damp or dusty surface
• Check compatibility on a small area if the substrate is old

In a bathroom or toilet, this type of covering is suitable for regular use, but it is still advisable to wipe away excess water quickly in order to preserve the adhesive and the quality of the installation over time. For a neat finish, allow a few millimetres of margin when cutting, particularly around corners, furniture legs and sanitary fittings.

Package contents

• 1 roll of grey-brown wood-effect self-adhesive flooring
• Dimensions: 60 cm x 5 m

This adhesive flooring for bathroom and toilet is a simple solution for renovating an existing covering with a understated and contemporary wood design. Its roll format, waterproof function and non-slip surface make it a relevant choice for improving the appearance and comfort of an indoor floor without complex work.