Self-adhesive silicone shower barrier 100 cm, anti-overflow threshold for walk-in showers, waterproof retention system for bathroom floors

[Note to buyers]: 1. The adhesive on the underside of the water barrier may not have fully melted due to weather conditions. Heat the underside of the shower barrier with a hairdryer before use to ensure the adhesive melts completely and bonds better. 2. The shower enclosure seal height is only 12 mm; it cannot block water flow with a height greater than 12 mm. 【Wide Range of Uses】: Silicone shower barriers can be used on the edge of countertops (kitchen sinks, washbasins), floors, and thresholds (bedroom doors, bathroom doors). They fill gaps of 0 to 20 mm (between the countertop and the wall, between the bathtub and the wall) to help eliminate hard-to-clean debris trapped in crevices. 【Easy to Install】: First, clean and dry the floor surface. Then, measure and cut the shower threshold to the appropriate length. Next, remove the red adhesive backing and stick the threshold strip to the smooth surface. Seal the edges with silicone after installation to prevent it from coming loose later and to ensure a longer lifespan. (Sealant is not included.) (Packaging) 【Good Quality and Easy to Clean】: The overflow threshold is made of food-grade organic silica gel, which is highly effective at blocking water, separating wet and dry areas, and is corrosion-resistant, high-temperature resistant, wear-resistant, and odorless. The material is flexible and can be cut to size. The flood barrier surface is smooth and easy to clean; simply wipe it with a damp cloth. 【Practical Design】: The bottom edge of the shower seal has a 90° right-angle design, suitable for corner installation. The shower floor edge has a gentle slope and rounded curve, providing good water retention. Its low profile makes it difficult to bump into, and it is firm and safe. It features built-in self-adhesive backing for easy installation.