Self-adhesive wall-mounted toilet paper holder in black aluminum – TRIMEC, no drilling required, modern and robust design

Product Description: Bathroom or Kitchen Shelf. Six layers of oxidation make the surface wear-resistant. Surface treatment: anodized and cashmere matte, resistant to everyday scratches. No drilling, no damage: patented glue + super double-sided adhesive, high load capacity, up to 10-20 kg. Easy to install: simply wait 24 hours before use. Suitable for smooth or rough surfaces. Easy to disassemble and reinstall. Tired of using drill bits? Hoomtaook is your best choice! Won't damage walls, perfect for bathrooms, toilets, kitchens, and organizing your space! No drilling required for installation. No damage; use glue to protect your walls. Patented adhesive. Stronger than ordinary suction cups and self-adhesive strips. Load capacity is up to 15 kg. No drilling required. Water and moisture resistant. In a humid environment, the suction cup product is easy to dislodge. This can cause injury or make a mess in your bathroom. No damage to water pipes or cables. Create a protective wall. Easy to install and remove thanks to the adhesive backing that protects the patented glue. Every family needs one. Choose your installation height. You can install it at the required height according to your needs. Two installation methods: No damage – install with glue to avoid damaging your walls. Or use screws for traditional drilling. Features: Size: 15.5 cm * 13 cm * 10 cm / 6.1 inches * 5.12 inches * 3.94 inches Weight: 264 g / 9.3 ounces Material: Aluminum foil Finish: Spray-on Installation Method: Wall-mounted, adhesive + double-sided tape Installation Steps: Clean and dry the wall, taking care to remove all dust, grease, and wax. Before installation, mark the desired position of the product on the wall. Apply adhesive to the metal area on the back of the product. Remove the protective film from the double-sided tape. Press the back of the product onto the marked position for 3 to 5 seconds. Use the included adhesive strip to secure the product. After 24 hours, you can remove the adhesive strip. For best results, please wait 3 to 5 days before use. Note: Do not apply this product to painted, wallpapered, lime-washed walls, or other soft or uneven surfaces.