Self Priming Water Pump 12V 5L Min 60W 116Psi High Pressure For Car Boat Caravan

Description: This high quality DC micro diaphragm pump with a pressure switch will be automatically cut off when the water outlet pressure is large enough. And works again when the pressure drops. It is not a good idea to let this pump run dry for too long. This type of product can be applied to occasions requiring energy saving and frequent switching, such as machine washing, solar energy system water supply and remote automatic control system of water delivery and suspension of water supply, etc. Features: ⭐With a pressure switch, it will be automatically cut off when the pressure of the water outlet is large enough.And starts again when the pressure drops ⭐The mounting feet are made of rubber instead of hard plastic, which provides quite good vibration isolation ⭐Built-in pressure switch, it turns on and off automatically when you turn your faucet or nozzle on and off ⭐The water inlet and outlet interface connects with PE or PU silicone hose ⭐This type of product can be applied to occasions requiring energy saving and frequent switching, such as machine washing, solar energy system water supply and remote automatic control system of water delivery and suspension of water supply, etc. Specification: Volt: DC12V Power: 60W Flow rate: 5L/min Maximum working pressure: 116psi (0.8MPA) Suction height: 1.5 meters Pump lift: 50 meters Size: approx. 9.9 x 16.7cm / 3.9" x 6.6" Line Length: Approx.29cm / 11.4" Interface Outer Diameter: Approx. 10.8mm / 0.4" Interface Inner Diameter: Approx. 6mm / 0.2" Package weight: 688g Application: widely used in general industrial equipment, chemical equipment, agriculture (lawn and garden), vehicle modification, vehicle cleaning, water purification and treatment equipment and other industries. Package Included:1 x Self-Priming Pump Instructions: 1. The direction with a small arrow on the water pump is the water outlet. 2. The wires are not divided into positive and negative poles. 3. The pump can be placed in any direction. Rating: 1. Do not soak in water. 2. The pressure adjustment screw cannot be adjusted at will. The pressure was adjusted before leaving the factory.The stop pressure can be adjusted precisely (the central screw of the black plastic cover on the top of the pump, clockwise to increase the stop pressure, counterclockwise to reduce the stop pressure) 3. Impurities cannot be pumped out, otherwise the pump will be easily blocked and the pressure will drop without water. 4. The shorter the inlet pipe, the better, the longest should not exceed 1.5 meters, and the outlet pipe can be as long as possible (within Yangcheng range). Use a tube with an inner diameter of 8 mm and an outer diameter of approximately 12 mm 5. Do not pump strong acid and strong alkaline liquids. Common faults and troubleshooting: 1. When the pump is not working, check to see if the two wires behind the motor are loose. 2. When the diaphragm pump is not used for a long time, the pump head will not have suction.Just drop a few drops of water into the pump port and operate for a few minutes, and it can be used normally when the sound changes.