Sensor occupancy of the seat passenger, emulator of derivation SRS of replacement for Benz ML W163 1998 2005

Features:

1. Model applicable : replacement of the emulator occupancy of the seat passenger for Benz ML W163 HAD 1998-2005, please confirm carefully the model for ensure a fit precise.

2. Solution ideal : resolution a problem of failure of the sensor of the seat passenger, replacement of the sensor of cushion occupancy of the passenger defective and resolution of the problem of the indicator warning SRS resultant of the problem.

3. High sensitivity : a times devices normally connected to the car, the signal apparat that the passenger is on the seat passenger will sent same if the seat passenger is not there.

4. Driving safe : a times installation completed, if a accident of the road itself product, the seat passenger SRS will deploye directly, improving significantly the safety of driving.

5. Good replacement : this simulation is designed for replace the sensor occupancy of seat damaged. you can also use the simulation for diagnostiquer the problem SRS and contourner the sensor occupancy of the seat original.

Specifications:

Item Type: Emulator of mat occupancy seat

Material: ABS

Fit: replacement of Benz ML W163 HAD 1998-2005, HAD Benz ML W169 2004-2012, HAD Benz ML W245 2004-2012

How to Use: 1. Annulent ignition. 2. Localisez the connector of the mat under the seat passenger. Tu dois regarder for this since the seat rear. The connector of the belt of safety is brands 1. The connector of the mat of seat is brands as 2. 3. Disconnect the cap of the mat and replacement-the by the cap of the emulator. 4. Connect the emulator of belt of safety, if necessary. 5. On ignition. The light LED of the emulator must start to rafale in 2 colors different, this which means that devices is powered (12V) and connected to unit of control SRS Successfully. Not of light - not energy (it there has a problem with installation electric of the car). The light LED signal in 1 color - The emulator is powered but has problems of connection to unit of control SRS (this indicates generally a problem with l'acu, contact-we). 6. Connect to new the scanner of diagnostic and reinitialisez the old codes of fault. Check if error of mat of seat defective has disparu. 7. If the code marge is reapparu or if the light SRS is always on, please follow our instructions installation detaillees.

Package List:

1 emulator of mat occupancy xseat