Set of 3 868 MHz remote controls for gates and garage doors, compatible with remote controls 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, gate and garage door remote controls, 4 C

Garage door opener remote control for 4020 TX03-868-4. Remote control for garage doors. Modern and compact design made of stainless steel. Stainless steel housing prevents accidental activation. Convenient clip on the back for optional attachment to a key ring. Rolling code protection against reading and eavesdropping on the radio signal. Range: approx. 50 m (depending on environment). Sliding cover prevents accidental activation. Battery: 3 V, CR2 (integrated). Dimensions: 87 x 24 x 16 mm (closed). Compatible devices: Garage doors. High-frequency connection. Integrated garage door remote control. Secure radio encryption thanks to rolling code radio technology. The frequency modulation method used is less susceptible to interference and increases transmission reliability. Thanks to its high selectivity, the transmitter's radio signal can be easily distinguished from other radio signals by the receiver and reliably received. Garage Door Remote Control - Operating Instructions STEP 1: Radio receiver on the circuit board (red button or labeled CODE or RADIO). STEP 2: Press the learn button (A) on the radio receiver. STEP 3: Press the desired key on the remote control (B). The remote control sends the radio code to the receiver. The corresponding indicator light goes out according to the radio code sent to the receiver. The corresponding indicator light goes out according to the selected channel. STEP 4: Repeat the above steps to program additional transmitters. This is a replacement garage door opener; it is not an original garage door opener. 868 MHz 4-channel garage door remote control. This garage door remote control is specifically designed for the following models: 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4021, 4025/4025V000, 4031/4031V000, and 4035/4035V002. Note: Not compatible with 433 MHz. Coding methods: Rolling code, coding via the door motor, activation by pressing the code button on the door motor. Everything you need is included: battery (installed), instruction manual, and remote control. We offer excellent customer service. Please contact us if you have any further questions.