Set of 100 interchangeable needle leveling tools for building floors, walls and reusable ceramic tiles - RWBricolage › Construction › Building materials › Flooring

Leveling System: T-shaped ceramic tile leveling system. Function: Maintains tile balance in the same horizontal position and prevents tile movement during curing. Suitable tiles: Thickness: 3 mm to 17 mm | Spacing between tiles: 2 mm to 6 mm. Reusable: This tile leveling system and replacement needles are reusable; it is easy to install or remove with a special wrench. New design: Leveler with solvent-sealed head, making toilet, sewer, and any tile installation easier, especially where leak detection devices are required. Instructions: 1. Remove the leveler and adjust the T-needle spacing. 2. Insert the T-pin guide along slot 1, then rotate it 180 degrees. 3. Tighten the leveling cap clockwise by hand or with a special wrench until both tiles are level. 4. Tighten the leveling cap and secure the T-pin to the bottom of both tiles. 5. Within 6 hours of paving time, or with cement and tile adhesive before it is completely dry, rotate the caps in the opposite direction, pull the T-pin 180 degrees, until the point to be removed is reached. Note: It is recommended to leave a gap of 1.5 mm or more. Please follow the instructions. Specifications: Materials: Polypropylene and stainless steel. Tile thickness: 3 mm to 17 mm. Tile joint: 2 to 6 mm. Quantity: 101 pieces. Size and color as shown in the image. Package weight: Approximately 600g. Contents: 24 tile levelers, 25 dowels. 50 interchangeable needles.
1 special nylon key.