Set of 12 Corrugated Galvanised Steel Roof Sheet Panels in Grey Wood Effect 129 x 45 cm

Set of 12 grey corrugated steel roof panels with wood effect

This set includes 12 corrugated galvanised steel covering panels, designed to make or renovate the roof of a garden shed, garage, carport, storage room, workshop or outbuilding. Their grey colour combined with a wood effect gives a sober, modern finish, suited to residential outdoor layouts as well as small construction projects.

The corrugated steel sheets are a practical solution for protecting a structure against bad weather, while keeping a limited weight. The galvanisation of the steel helps limit the oxidation risk in normal outdoor use. To ensure good durability, fitting must be done with suitable fixings, sufficient overlaps and correct rainwater drainage.

Key benefits

• Complete set of 12 corrugated roof panels.
• Galvanised steel suited to outdoor covering applications.
• Grey finish with wood effect for aesthetic integration into the garden.
• Practical format for covering a shed, storage room, workshop or annex.
• Total theoretical surface of about 6.97 square metres before overlap and cuts.
• Solution suited to a light roof renovation or a new covering.
• Material easy to handle and cut with the appropriate tools.

Recommended uses

These panels can be used to roof a garden shed, storage room, garage, carport, cabin, workshop or small outdoor construction. They can also suit certain cladding or side protection projects, subject to compatibility with the load-bearing structure and applicable construction rules. They are intended to be installed on a stable wooden or metal frame, with sufficient slope to facilitate water flow.

Product features

• Product: set of corrugated steel roof panels.
• Main function: covering and protecting an outdoor roof.
• Material: galvanised steel.
• Colour: grey.
• Appearance: wood effect.
• Quantity: 12 panels.
• Dimensions of one panel: 129 cm length, 45 cm width and 0.03 cm for the third indicated dimension.
• Theoretical surface of one panel: about 0.58 square metre, excluding overlap.
• Indicated weight for the set: 14.5 kg.
• Brand: not specified in the available information.
• Model: not specified in the available information.
• Electrical voltage: not applicable.
• Electrical power: not applicable.
• Capacity: not applicable.

Installation and usage advice

Before fitting, check the flatness, solidity and spacing of the frame. Position the panels in the direction of the slope to promote rainwater flow. Provide longitudinal and lateral overlap suited to wind exposure and the recommendations applicable to your project. Use covering screws compatible with the steel, fitted with sealing washers, and fix the panels on the high points of the corrugation when recommended by the fitting system. The fixing accessories are not indicated in the supplied contents.

Wear gloves when handling and protect the cut edges against corrosion. It is advisable to check the useful dimensions after overlap, as the actually covered surface will be less than the theoretical surface. Also check the local requirements concerning minimum slope, snow load, wind resistance and roof ventilation.

Package contents

• 12 corrugated galvanised steel roof panels, grey colour with wood effect.
• Fixings, finish profiles and sealing accessories: not included or not specified in the available information.