Set of 2 Electronic Heating Mats, Waterproof Hydroponic Heating Pads for Seedling Reptile Plants

Designed with the latest technology. The multi-layered construction, with an additional layer of insulating PET film, gives you complete peace of mind knowing that this seed heating mat won't overheat and burn your delicate roots 24 hours a day.Water-resistant design and extra-strength connection. IPX-4 water resistance means you can clean the mat or wipe up spills without worry.Extra-reinforced connection between the extra-long power cord and the mat, correcting a common weak point in other heating mats.(Energy-efficient design: uses only 20 watts.)Maintains Temperatures Easily: Seed heating mat technology allows for a temperature 10-20°C higher than ambient air temperature - ideal for seed starting and propagation!Maintains a consistent temperature evenly, even in cold weather (with an insulating layer underneath).Instructions1. Locate a flat, dry surface suitable for the size of your heating mat.2.Avoid cold surfaces, as they will counteract the heating capacity of your heat mat.3. Plug the heat mat's power cord into a standard 220-volt outlet.4. Place a propagation tray or other plant container on the heat mat.Power: 18 Watts, 220V ~ 240V.Cable Length: 173cm.Heats the root zone 10 to 20 degrees above ambient temperature.Instructions.1. Locate a flat, dry surface suitable for the size of your heat mat.2.Avoid cold surfaces, as they will counteract the heating capacity of your heat mat.3. Plug the heat mat's power cord into a standard 220-volt outlet.4. Place a propagation tray or other plant container on the heat mat.Caution1. Never leave the heat mat submerged in water or any other liquid.2. Do not place the heat mat on or under any other heating, heating, or insulating device.3. Do not place the heat mat on a rough or sharp surface, as this may damage it.