Set of 2 recessed LED bulbs for stainless steel kitchen hoods - AquaForge

Product Contents: You will receive 2 kitchen hood bulbs, a sufficient quantity for your replacement needs. Dimensions: The diameter of the replacement bulb is approximately 6.9 cm, its height approximately 2.2 cm, and its length approximately 14.5 cm. Please measure the bulb you wish to replace and check the voltage and wattage compatibility before ordering. Premium Materials: Made of high-quality stainless steel and polypropylene (PP), our LED kitchen hood bulb is robust, reliable, and shock-resistant. You can use it with confidence. High Brightness: Operating at 12V DC, this kitchen hood bulb offers 1.5W of power and a color temperature of 6500K for optimal lighting. New Integrated Driver: This kitchen hood light is fully compatible with a 12V DC operating voltage. Please check the compatibility of the bulb you wish to replace. Installation is quick and easy with a simple one-click connection. Treat yourself to a new solution for your built-in driver. Color: See image. Material: Plastic. Package contents: 2 kitchen hood bulbs. Only the above-mentioned contents are included. Other products are not included. Note: The color of the item in the photo may differ slightly from the actual product due to reflections and your monitor settings. A margin of error of +/- 1 to 3 cm is possible. Warning: If the hood bulb does not light up after replacement, several reasons may be the cause: 1. Power failure: Check that the appliance is properly plugged in and that the power is on. 2. Wiring problem: Check the compatibility of the connectors and, if applicable, the polarity of the wires with those of the hood. If they do not light up, they can be replaced and should work. 3. Voltage failure: Our lamp is 12V and 1.5W and cannot be used at voltages higher than 12V and 1.5W, as this will destroy it instantly. 4. Control panel failure: If all other functions are normal but only the lamp does not turn on, there may be a fault with the control panel. In this case, you should contact the manufacturer or a qualified technician for repair.