Set of 20 super hard tungsten carbide burrs, rotary tool, 1/8" shank, compatible with Dremel wood carving accessories

🛠️ Set of 20 Carbide Turning Pins: Shank Diameter: 1/8" (3 mm). Packaging: 1 plastic box and 1 cardboard box.

🔹 Bit Details:
• 10 x Bit Diameter: 3 mm solid carbide, total length 38 mm, 9 edges.
• 10 x Bit Diameter: 6 mm brazed joint, shank material 40Cr, total length 43-50 mm, 14 edges.

💎 Features: Bit hardness: HRA 90, cut type: double cut, coating: glossy (uncoated). Maximum speed: 120,000 rpm (3 mm), 60,000 rpm (6 mm). Rotation direction: clockwise/right, feed direction: counter-rotation or tilting for fine finishes or smooth chamfers.

⚙️ Tool Shapes: Cylindrical, cylinder with ball, spherical, oval, axial with ball, axial, flame, conical with ball, conical, inverted conical.

🔧 Drive Type: Optimal: straight lines, angle grinders, flexible shaft drives, robots.
Medium: electric drills, drill presses.
Attachment type: pneumatic or electric.
Best attachment type: 1/8" pickup; medium type: chuck.

🪵 Material Applications: Hard wood, balsa, wax, soapstone, slate, marble, granite, concrete, steel, hardened steel, welded joints, stainless steel, brass, copper, bronze, aluminum, cast iron, cobalt, nickel, titanium, zinc, earthenware, porcelain, fiberglass, plastics and rubber, fiber reinforced plastics.

✂️ Burrs Applications: Engraving, sculpting, polishing, deburring, contouring, chamfering, milling, cleaning, drilling, cutting, grinding, oblong holes, etc.

💡 Suggestions:
1. 300 to 500 watts of drive power is optimal for grinding welds and hardened steel.
2. For beginners, choose a head diameter smaller than the hole to avoid collisions.
3. Do not press too hard; let the speed do its work.

📦 Package Contents: 1 set of rotary grinding head. (Other products not included)

⚠️ Warnings:
1. Manual measurements: possible deviation of 1 to 3 cm.
2. The actual color may vary slightly from the photos due to screen and lighting.