Set of 3 868MHz Remote Controls for Gates and Garage Doors, Compatible with Remote Controls 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4 Channels

Garage Door Opener Remote Control for 4020 TX03-868-4

 

• Garage Door Remote Control
• Modern and compact stainless steel design
• Stainless steel insert housing to prevent accidental activation
• Convenient mounting clip on the back for optional keyring attachment
• Rolling code to prevent radio signal reading and listening
• Range: Approx. 50 m (depending on environment)
• Sliding cover to prevent accidental operation
• Battery: 3V, CR2 (built-in)
• Dimensions: 87 x 24 x 16 mm (closed)
• Compatible devices: Garage doors
• High-frequency connection

 

Integrated garage door remote control

 

• Secure radio encryption using Rollingcode technology. The frequency modulation method used is less susceptible to interference and increases transmission security. Thanks to its high selectivity, the radio signal from its own transmitter can be clearly distinguished from other radio signals by the receiver and received safely.

 

 

Garage Door Remote Control - User Manual

STEP 1:

• Radio receiver on the circuit board (red button, or written next to it in English: CODE or RADIO).

STEP 2:

• Press the learning button (A) on the radio receiver.

STEP 3:

• Print the desired key onto the handheld transmitter (B). The handheld transmitter sends the radio code to the receiver. The corresponding LED turns off according to the radio code transmitted to the receiver. The corresponding LED turns off depending on the selected channel.

 

STEP 4 :

 

• Repeat the above procedure to program other transmitters.

 

 

Replacement garage door opener, not an original garage door opener.
Garage door remote control frequency 868 MHz 4 channels. The garage door remote control was specifically designed for use with models 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4021, 4025/4025V000, 4031/4031V000, 4035/4035V002. Note: Not compatible with the 433 MHz band.
Coding method: Rolling code, coding via the gate motor, activated by pressing the motor's code button.
Everything needed is included in the package: battery (built-in), user manual, and remote control.
Satisfactory after-sales service. For any questions, please feel free to contact us.