Set of 3 universal remote controls for gate and garage door, 433.92 MHz, compatible with DEA GT2, GT4, MIO, TR2, TR4 and R2N models.

Compatible with

DEA 433.92 MHz Fixed Code

DEA 433-1, 433-2, 433-4

DEA MIO TD2, MIO TD4

DEA punto-2, punto-4

DEA GT2M, GT4M

Programming?

When a button is pressed, the remote sends a radio signal and the LED lights up. This indicates the code type being used as well as the HCS rolling code (red LED) (factory setting).

HT12 DIP switch (green LED);

DARTDEA Advanced Rolling Transmission – Alternating Red/Green LED

Changing the Transmission Code

Press and hold buttons T1 and T2. When the remote control LEDs light up (10 seconds), wait for them to blink to indicate the selected code: 1 blink per second = HCS rolling code; 2 blinks per second = HT12 DIP switch; 3 blinks per second = DART. Press and hold button T1 and use button T2 to change the blink pattern. Once the new code is selected, press and hold button T2 until the LEDs turn off (5 seconds).