Set of 3 universal remote controls for gates and garage doors – 433.92 MHz frequency – Compatible with common models

Compatible with

DEA GTI2

DEA GTI4

DEA 433.92 MHz Rolling code

DEA GT2, GT4

DEA MIO TR2, TR4

DEA MIO TR2N, TR4N

DEA GENIE 273, GENIE 273L

DEA GOLD 288, GOLD 289

DEA 433.92 MHz Fixed code

DEA 433-1, 433-2, 433-4

DEA MIO TD2, MIO TD4

DEA punto-2, punto-4

DEA GT2M, GT4M

How is it programmed ?

When a button is pressed, the remote control emits a radio signal and illuminates the LED which indicates, in addition to the code type used, the HCS rolling code (red LED) (factory setting)

HT12 DIP switch (green LED);

DARTDEA Advanced Rolling Transmission - Alternating red/green LED

Changing the transmission code

Press and hold the T1 and T2 buttons. When the LEDs on the remote control light up (10 seconds), wait for them to flash to indicate the set code type:

1 flash per second = HCS Rolling Code

2 flashes per second = HT12 DIP SWITCH

3 flashes per second = DART

Press and hold the Ti button and use the T2 button to change the flashing type.

Once the new code is selected, press and hold the T2 button until the LEDs turn off (5 seconds).