Set of 4 Diamond Drill Bits for Ceramic Tile Porcelain Stoneware Tiles Glass Stone. Professional Diamond Drill Bits Ceramic Tile Drill Bits Tool - 6mm 8mm 10mm 12mm

General description

The set of 4 diamond drill bits is designed to efficiently drill hard materials such as tiles, ceramics, porcelain stoneware, glass, marble and concrete. Made with high quality diamond grit, these drill bits guarantee clean and precise holes. They are filled with cooling wax, making them suitable for dry drilling, although the use of water or coolant is recommended to extend their life.

Technical specifications

Drill diameters: Ø 6 mm, 8 mm, 10 mm, 12 mm

Hexagonal shank: 7 mm

Total length of drill bits: 65-80 mm

Compatibility and accessories

Compatible with drill chucks of all common drills and lightweight hammer drills from brands such as Bosch, Hilti, Metabo, Makita, Milwaukee, etc.

Installation

Use the carbide bit provided to create a starting cut.

Place the diamond drill bit on the cut at an angle of approximately 45° and carefully drill.

Once the cut is deeper, hold the machine and drill bit in a vertical position.

Turning slightly while drilling ensures dust and debris are evacuated.

Take regular breaks to cool down the diamond drill bit and the material.

Repeat the steps until the hole is complete.

Always clean the drill bit after use and remove any residue before using it again.

Usage

Ideal for drilling materials such as glass, tile, ceramic, porcelain, granite, marble, quartz, limestone, fiberglass, terrazzo, porcelain stoneware, masonry and sandstone.

Cordless drills should have a speed of at least 1600 rpm, while a speed of 2000 to 3000 rpm is recommended for electric drills.

Avoid using machines with low power and low speed, as this significantly reduces the life of the drill bit.