Set of 4 Diamond Drill Bits for Ceramic Tiles, Porcelain Stoneware, Tiles, Glass, and Stone. Professional Diamond Drill Bits for Ceramic Tiles - 6mm, 8mm, 10mm, 12mm

General Description

This set of 4 diamond drill bits for tile, ceramic, porcelain stoneware, glass, and stone is designed to create clean and efficient holes in hard materials. Made with high-quality diamond grit, these drill bits are temperature-resistant and filled with cooling wax, making them suitable for dry drilling. To prolong their lifespan, it is recommended to use water or coolant when drilling.

Technical Specifications

Drill bit diameters: Ø 6 mm, 8 mm, 10 mm, 12 mm

Hexagonal shank: 7 mm

Total drill bit length: 65-80 mm

Compatibility and Accessories

Compatible with the drill chucks of all common drills and light-duty rotary hammers from brands such as Bosch, Hilti, Metabo, Makita, Milwaukee, etc.

Installation

Use the supplied carbide drill bit to create a starting notch.

Place the diamond drill bit on the notch at an angle of approximately 45° and drill carefully.

Once the notch is more When drilling deep, hold the machine and drill bit in a vertical position.

Use circular motions while drilling to remove dust and debris.

Take regular breaks to cool the drill bit and the material.

Repeat the steps until the hole is complete.

Always clean the drill bit after use and remove all residue before reusing it.

Applications

Ideal for drilling into glass, tile, ceramic, porcelain, granite, marble, quartz, limestone, fiberglass, terrazzo, porcelain stoneware, masonry, and sandstone.

For cordless drills, a speed of at least 1600 rpm is required.

A speed of 2000-3000 rpm or higher is recommended for electric drills.

Low-power, low-speed machines significantly reduce drill bit life.