Set of 4 door logo projectors, compatible with A1/A3/A4/A5/A6/A7/A8/Q3/Q5/Q7/R8/TT/RS/S

【2024 Upgraded Car Door Light Projector】The door logo lights make getting in and out of the car easier and alert other vehicles to the open door, while maintaining your car's professional style. 【Cool Effect】The courtesy door light logo projects your car brand's logo onto the ground when the car door is opened. The patterns can alert others to avoid accidental drops, preventing the owner from seeing the road surface beneath their feet and avoiding puddles or other obstacles on the ground. 【HD Quality】The rings light up white and the lettering is red. It looks really cool. The car door marker light uses a high-brightness LED lamp. The light passes through the heat-resistant, high-definition film and shows undistorted and unfaded patterns on the ground after passing through the ultra-high-definition lens. 【Upgraded Car Door Lights with More Compatibility】 Compatible with various models, including A1, A3, A4, A5, A6, A7, A8, Q2, Q3, Q5, Q7, TT, and RS series. The car door lamp panel projector uses the latest auto-decoding circuit chip, which does not conflict with the car's software. Please check the model's fitment chart before purchasing. The door lights are suitable for both new and older models. 【Easy Installation】 Installation takes only two minutes, plug and play, and will not damage your car. The auto-decoding circuit chip requires no connecting cables, which prevents conflicts with the car's software. Even women can easily install it. Product Description: When the car door is opened, the door light projects your car brand's logo onto the ground. This design can alert others to avoid accidents when exiting the vehicle, allowing the owner to see below and avoid driving into puddles or other obstacles. It is recommended to install it on all four doors for an enhanced visual effect. Installation Steps: Step 1: Use a simple tool to gently remove the original car light. Step 2: Replace the door light with the new one, locate the mounting hole, and insert it. Step 3: Connect the new door light. Step 4: Press the door light directly into the original location.