Set of 4 Height Adjustable Bed Support Legs (18-32cm), Center Support Legs for Bed Frame, Center Slats and Furniture, Heavy Duty Metal Replacement Legs.

Set of 4 height-adjustable bed support feet (18 to 32 cm)

Enhance the stability and durability of your bed with these sturdy metal center support legs. Ideal for bed frames, center slats and other furniture, these replacement legs provide essential support to prevent sagging and damage.

Adjustable height to adapt to all floors

Thanks to their rotating base, these feet easily adjust for a height between 18 cm (minimum height) and 32 cm (maximum height). This feature helps compensate for unevenness in the floor and provides a perfect fit for your bed frame or furniture.

Reinforced support for optimal load

Some heavy mattresses can cause the slats or frame to twist or break. These center legs provide much-needed extra support, effectively protecting against deformation and extending the life of your bed. The thickened and widened structure increases the bearing surface, thereby reducing pressure and improving load capacity.

Simple and flexible installation

Two installation methods are possible:

With holes: Align the double holes in the legs with those in the frame, then secure using the supplied bolts and nuts.

Without holes: Use the included mounting plates to attach the legs directly to the frame or slats.

Each set includes 4 adjustable feet, 8 6cm bolts, 8 hex nuts and 4 auxiliary plates for a complete and secure installation.

Tough steel construction and durable finish

Made from high quality steel, these feet benefit from a multi-layer anti-rust paint finish for a long life. The tubes and base are thick, ensuring robustness and stability. Superior rubber pads are integrated for optimal grip, noise reduction and floor protection.

Tips for use

To ensure successful installation, check the dimensions of your bed frame or slats before purchasing. Place the legs at the corners, sides or center depending on your support needs. Be sure to tighten the bolts properly for a firm hold.

Technical characteristics

Material: High quality steel

Adjustable height: 18 cm to 32 cm

Color: Neutral paint finish (usually black or gray)

Approximate weight per leg: Approximately 0.5 kg (varies depending on setting)

Recommended maximum load: Suitable for high loads thanks to the enlarged supporting surface

Pack contents: 4 adjustable legs, 8 bolts (6 cm), 8 hex nuts, 4 mounting plates

Opt for these adjustable support legs for a stable, quiet and durable bed. Ideal for bed frames, center slats or any furniture requiring additional support, this set gives you a cost-effective solution to avoid costly repairs.