Set of 4 pneumatic fittings, air plug design, plastic outer diameter tube for connecting air hoses in hydraulic and pneumatic systems

Size and packaging: Operating pressure: 0-1.2 MPa; Operating temperature: 0-70 degrees Celsius; Suitable for outer diameter: 5/32"; Connection size: 18.5 x 11 mm (L x W); Package includes: 4 pneumatic push-in fittings. [Material]: The push-in fittings are made of plastic and are characterized by flexibility, wear resistance, light weight, resistance to cracking, pressure and corrosion, good sealing performance and long service life. Design: The pneumatic hose connector has an internal hose clamp that ensures a secure hold, good sealing performance and tightness. The connector is rotatable 360° so that the hose direction can be changed after installation. Installation: The push-in fitting is easy to install. First, cut the hose flat and then insert it into the end of the fitting to avoid leaks. After inserting the hose, try to pull it out. If it cannot be pulled out, it is connected. When disconnecting the hose, make sure that there is no pressure in the Hose is, and then press the cap down evenly. [Wide Application]: Fittings These fittings are suitable for connecting hoses made of polyethylene, nylon, and polyurethane. They are commonly used in low-pressure hydraulic and pneumatic systems, e.g., in aircraft control systems, air horns, automotive assembly and maintenance, etc. Specifications: Material: Plastic. Color: Black. Operating pressure: 0–1.2 MPa. Operating temperature: 0–70 °C. Suitable for hose diameter: 5/32 inch. Connection size: 18.5 x 11 mm (L x W). Package includes: 4 pneumatic connectors.