Set of 5 Smart Remote Controlled Plugs, Wireless Remote Controlled Plug with 2 Remote Controls, Programmable Electrical Plugs, European Plug, White

CONTROL YOUR HOME FROM ANYWHERE: These sockets are used for small Euro plugs. Not compatible with ordinary German sockets. These 5-way remote-controlled sockets with 2 remote controls allow you to turn your electrical appliances on and off from anywhere in the house. REMOTE CONTROL: The maximum range is 30 m in an open area. The powerful RF signal passes through walls and doors and does not interfere with other electronic devices; the maximum power is 2300 W and is therefore sufficient for most appliances. COMPATIBILITY: These remote-controlled sockets are particularly suitable for electronic devices that are difficult to access, e.g., decorative lamps for Christmas, DVD players, TVs, receivers, lamps, hi-fi systems, great for the elderly, pregnant women, etc. SAFETY AND RELIABILITY: The ABS casing offers excellent protection against high temperatures. The CE certificate guarantees the quality of the wireless switch kit. Integrated plastic covers ensure child safety. Use the sockets without worry. Wireless remote control socket. Instructions: 1. Place the remote base station in a 230V outlet. 2. Connect your devices to the remote control base. Make sure your device is switched on. 3. Turn your devices on and off using the buttons on the remote control. Manual reset: You can manually turn the device on and off by pressing the ON/OFF button on the front of the receiver. (Do not press the button for manual operation, otherwise the device will enter charging station mode.) Wireless Smart Plug with Remote Control. This device is equipped with patented technology. All indoor and outdoor transmitters can be paired with all indoor and outdoor receivers. Follow the instructions below to connect a transmitter to its receiver. 1. Press the [ON/OFF] button on the receiver. 2. Press and hold the power switch for 3 seconds. The operating indicator D will start flashing steadily. 3. Press the transmitter for 2 seconds [ON] and then [OFF]. The D will stop flashing. 4. You have successfully paired the transmitter with your receiver. Note: The transmitter and receiver included in this package are pre-programmed and ready to use. Pairing is only necessary when using additional transmitters. Contents: 5 wireless connectors, 2 remote controls, 1 user manual (French not guaranteed), 2 plugs. https://m.media-amazon.com/images/I/61guDc9LAfL.jpg