Set of safety push blocks and push sticks for woodworking, 5-piece set in safety orange, ideal for

This five-piece safety kit is designed to be your essential safety protection when working close to knives or blades on a router table, shaper, band saw, table saw, and jointer. From the narrow V-shaped push stick to the long, heavy-duty push block, this kit covers all the basics for many different woodworking applications. Each tool in this kit is intentionally made in SAFETY ORANGE for high visibility during use. This allows the user to see exactly where their hands are during the cutting or routing process. Being ORANGE SAFETY-CLEAR also makes it easy to find the device when it's not in its normal location. The general idea behind these safety devices is to help guide and control your material when feeding a table saw, band saw, jointer, or router table. Push blocks are typically used on jointers and some router applications, while push blocks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process. Soft, responsive rubber foam pads line the base of the two small push blocks and the large push block. The rubber soles make pushing and controlling your material much easier and safer than doing it by hand. The soles are also washable with warm water. The rubber soles must be allowed to dry for 24 hours before reuse. The 5-piece safety kit includes 2 small push blocks (1 angled handle and 1 small push block with an offset handle), 1 of each long or large push block, 1 of each standard-width push stick, and 1 narrow-width V-shaped safety push stick.