Shutter remote control, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz

General descriptionPlease note this is a compatible remote control, not an original product.Technical specificationsFrequency: 433 MHzChannels: 4Battery: 12 V / 27 A alkalineCompatibility and accessoriesCompatible with RTS models: Keytis NS 2 RTS, Keytis NS 4 RTS, Keytis 2 RTS, Keytis 4 RTS, Keygo 4 RTS, Telis 1 RTS, Telis 4 RTS, Telis Soliris 1 RTS, Telis 4 Soliris RTS, Telis 1 Modulis RTS, Telis 4 Modulis RTSCompatible with similar receivers and gate openers: AX24ns, AC230ns, Axovia, Elixo, Ixengo, Axorn, AxRoll, Passeo, Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTSContents: 1 remote controlInstallationOpen the receiver case, which is located near your engineOn the receiver board, press the Prog 1 programming button until the LED L1 lights upPress a button on your new remote, then releaseThe LED light on the receiver will flash then turn offWait 10 seconds; your new remote control is programmedFor white Telis programming with hidden button: Press the hidden button for 2-3 seconds on the original remote, then press buttons 1 and 2 on the new remote for about 1-2 seconds at the same time, and finally press button 4 for 1-2 secondsYour remote control is now ready to operate