SIKA Sikaflex 11 FC Plus polyurethane adhesive sealant - Gray - 380g
In stockView full description
Delivery from £5.20
Delivery from £5.20
Orders over £0.00 with this seller qualify for free delivery
Uh oh…it's not possible to order less than 1 unit of this product.
Sorry, you can only order up to 29 units of this product!
Secure payment by debit or credit card
Sold by: DIY Zone
- Standard delivery in 2 to 4 working days (P&P starting at £5.20)
Delivery to the British Isles only (UK, Jersey and Guernsey)
Presentation: SIKA Sikaflex 11 FC Plus polyurethane adhesive sealant - Gray - 380g, ideal for grouting or gluing. Putty can be painted after drying. Advantages: ± 35% movement capacity (ASTM C 719) Silicone-free Very good adhesion on most building materials Smoothing of bonding surfaces is not necessary Good mechanical resistance Good weather resistance Impact and shock absorption vibration Very low emissions Can be painted Characteristics: Density: 1,35 kg / l approx. Skin formation time: 70 minutes approx. (23 ° C / 50% RH) Polymerization rate: 3.5 mm / 24 hours approx. (23 ° C / 50% RH) Application Temperature: +5 ° C to +40 ° C and at least 3 ° C above the dew point. Color: Gray Packaging: Comes in its original packaging Advice: SUPPORT The substrate must be dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other loosely adhering elements should be removed. Sikaflex 11 FC + adheres without primer or activator. However, to obtain optimal adhesion and performance applications such as renovation work, joints that are highly stressed and joints that are highly exposed to the weather or immersed in water, primers, degreasers and surface preparations. APPLICATION Grouting After the necessary preparation of the supports, install in the joint at the required depth, a Sika JOINTS FIT of section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge or refill in a putty gun. Extrude the Sikaflex 11 FC + sealant into the seal and press it onto the seal lips ensuring good contact with them. Fill the joint continuously and avoid any air bubbles. Sikaflex 11 FC + must be firmly squeezed against the joint lips to allow good adhesion. It is recommended to use media protection strips if clean, straight edge joints are required. Remove the strips before the putty deforms a skin. Do not use smelt products with solvents. Bonding After the necessary preparation of the supports, apply Sikaflex 11 FC +, in points or cords on the bonding surface a few centimeters apart. Press the element to be glued to the right place by hand only. If necessary, use adhesive tapes, shims or accessories to hold the assembled components during the first hours of polymerization. A poorly positioned element can be easily removed and repositioned during the first few minutes of application. Press again. Effective bonding will be obtained after the complete polymerization of Sikaflex 11 FC +, that is to say after 24 to 48 hours at + 23 ° C for an adhesive thickness of between 2 and 3 mm. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.
Product specification :
Density: approx 1.35 kg / l Skin formation time: approx. (23 ° C / 50% RH) Polymerization rate: 3.5 mm / 24 hours approx. (23 ° C / 50% RH) Application Temperature: +5 ° C to +40 ° C and at least 3 ° C above dew point
Color: Gray. Reference: 7288
- Brand SIKA
- Type of product Glue
- Attributes Vibration resistant
- ManoMano Reference ME6494946
- SKU 7288
About The Brand
Founded in Switzerland by visionary inventor Kaspar Winkler over 100 years ago, Sika has developed into a successful global company with a leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing and protecting in the building sector and the motor vehicle industry. The future success of Sika is not only dependent on pursuing the right strategy, but is just as much based on the trust and dedication of all employees. The Sika journey to global leadership is founded on the company's entrepreneurial philosophy and the Sika Spirit.
What do our customers say about us and our sellers?
Great online assistance, especially when I thought I had a piece missing, which I later found was lodged in one of the resting,...
Very happy with the seller, and the delivery was quite and within the timescale
The product description was informative and helped me to decide on the purchase. I was impressed by the quality and it was...
I love this item it works well in the rooms and looks very nice. I was going to purchase something similar from Ikea, but...
Very pleased with this seller. Their prices are good and delivery was speedy and package arrived in good condition.
Yes very good
Good product, excellent value. 2 man construction / fitting, not sure it could be fitted in situ by a single individual.
Very easy to put together fast delivery easy to read instructions
Delivery was good and came quickly.
Great seller! Would highly recommend.
Good communication following order confirmation up to delivery.
Certainly use them again
Delivery was one day delayed, otherwise good service
Brilliant keep up the good work
Very happy with this seller. Updated regularly with delivery details.