SIKA Sikagard Sloped Roof Protection - White - 4L

Overview :
Presentation: SIKA Sikagard protection paint Sloped roof - White - 4L, an elastic membrane for protection against water infiltration. Improves the insulating power of walls by removing moisture. A protection that lasts in time with a product resistant to aging, weather, prolonged action of the gel and UV. Advantages: Elastic diaphragm: Sikagard Dry Film Protection Sloped roofs retain excellent flexibility over time, allowing it to withstand crazing and microcracking of the substrate Protection against water infiltration: Sikagard Protection Sloped roofs prevent the penetration of water rain while leaving "breathe" support Sikagard Protection Sloped roofs improves the insulating power of walls by removing moisture Adhesion on many supports even slightly damp: concrete, mortar, breeze block, fiber cement, tiles, slates, bricks, steel, zinc, aluminum, PVC and polyester Resistance to bad weather, aging, prolonged action of the gel and UV, even in aggressive atmosphere urban, industrial or marine Simplicity of implementation Coating in aqueous phase, low content VOC (Volatile Organic Compounds) Read the package leaflet before use Characteristics: Density: 1, 3 Consumption: About 1 L / m² for 2 layers Application temperature: between + 10 ° C and + 30 ° C Capacity: 4L Color: White Reference: 460506 Packaging: Comes in its original packaging Advice: SUPPORT Concretes and new mortars will be at least 28 days old. The substrates must be clean, sound, free from any non-adhering parts or that may hinder adhesion (fats, oils, old paints ...). Synthetic substrates (PVC, polyester) will be slightly sanded to create a micro-roughness. Ferrous substrates will be carefully degreased and protected from corrosion with a rust preventive primer. APPLICATION Apply protective paint in two coats by brush or roller. On porous substrates, first apply a primer (3 parts Sikagard Protection Sloped Roofs diluted with 1 part water). Waiting time between 2 layers: 12 to 24 hours according to temperature and hygrometry. Protect the site from rain during and after application of the product (4 hours minimum). Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.
Product specification :
Density: about 1.3 Consumption: About 1 L / m² for 2 layers Application Temperature: between + 10 ° C and + 30 ° C .
Color: White. Reference: 460506