Silent, automatic induction water pressure booster pump for bathroom shower, DC24V, EU plug 100-240V

Features:1.Fully Automatic: The automatic sensor button is controlled by the water flow.Before turning on the water pump, please open the tap to ensure water is flowing through the pump.
2.Intelligent Protection: When the water inlet to the pump is close to 0, the water pump stops working when the water pressure is low, and the low water protection is activated.
3.High Compatibility: This pressure-boosting water pump can be used with both tank and tankless water heaters to bring you more convenience.
4. Improved water pressure: If you are troubled by low water pressure, this pump can increase water pressure and provide you with a constant water flow.
5.Low noise: The pressure booster pump operates quietly and won't disturb your neighbors, making it ideal for home use.
Specifications:Item Type: Water Pressure Booster Pump
Material: ABS, Red Copper
Insulation Class: Class H
Protection Class: IP56
Boost Effect: 65pa
Noise: Low
Open Mode: Automatic Water Flow Control
Flow Rate: 15L/minute
Head: Approx.18m / 59.1ft
Inner Pipe Diameter: Approx. 15 mm / 0.6 inches
Average temperature: 2-65 ℃

How to use:Install and use directly
Package list:1 x Water pressure booster pump 1 x Power adapter 1 x Water hose 1 x Instruction manual 1 x Hook
Note: 1. The water pump has a built-in water switch valve.A minimum flow rate of 1.5 L/min is required to open the valve and start the pump.If the water flow switch cannot be opened, the power must be disconnected again for 3 to 5 seconds, and the water pump will be forced to start for 10 seconds.Powering and running for 10 seconds will automatically stop, indicating that the water flow switch valve is not open.2.Testing Method: Take a mineral water bottle and connect it.Generally, a mineral water bottle is a 500 ml bottle, and approximately 3 bottles can be connected in one minute, allowing for installation and use.