Silicone shower barrier, flood barrier for shower seal, under-door, shower seals, shower stop, shower edge, bathroom sticker, 3.5m transparent)

About this item: Environmentally friendly silicone material: The shower barrier is made of high-quality silicone, which is safe, waterproof, corrosion-resistant, wear-resistant, resistant to high and low temperatures, and will not deform. It can be cut to the desired size. The flood barrier is very easy to clean and maintain; simply wipe it with a damp cloth. Strong adhesive: Won't fall off: The strong adhesive seal for shower stall joints is coated on one side with a highly adhesive substance. The 1mm thick adhesive is stickier than ordinary sealing tape. You can apply additional glue to the joint between the shower barrier and the floor for long-term use to reinforce the fixing and sealing effect. Easy to remove, leaves no glue residue. Easy to install: Before installation, clean and dry the surface of the shower door seal. Heat it with a hairdryer for better adhesion, peel off the backing, and press firmly for a few minutes. For added security and waterproofing, you can use silicone sealant to reinforce the bottom of the shower seal. After installation, let it cure for 24 hours before use. Clean and tidy kitchen: The tall kitchen drain strip is designed to be placed on the edge of the countertop or around the kitchen sink to create a water barrier, preventing spills and keeping things dry. No more drips, no more water on the floor, no more soaking into the cabinets. The silicone strip provides a clean, water-blocking finish and is a great decorative element for your modern kitchen. Wide application: This adhesive seal can be applied to almost any smooth surface, including walls, floors, tiles, etc. The shower barrier can be used around sinks and bathtubs. It can also cover the gap between the bathtub or countertop and the wall, as the rubber edge is waterproof and dustproof.