Simulated dummy solar camera with motion detector, surveillance camera with powerful LED light for burglary protection, 3 modes, IP65 for indoor and outdoor use

Speed ​​Dome Simulation Camera - An economical solution to the security theft problem, very similar to real cameras and activation lights. Motion Detector - The built-in motion sensor provides an additional deterrent by activating a powerful LED light for 30 seconds when motion is detected and rotating left and right to track movement. Sleek Design - 360° adjustable stand, operates on solar power and 1 AA battery (not included) - Automatically illuminates to be a strong deterrent with its lens and flashing light. Widely Used - Virtual surveillance cameras look like real cameras and effectively protect your home or business; suitable for indoor and outdoor use. Easy Installation - Quick and easy installation on a ceiling or wall with the included screws. No wiring required. Contents: 1 solar-powered dummy camera, 5 screws, 1 warning sticker. This is a simulation camera and anti-theft light that can provide good theft protection and also serve as lighting for a specific scene. Usage Recommendations: 1. Insert one AA battery (not included) before use. 2. Please test the functions before installation to ensure they work correctly after installation. 3. Before adjusting the angle, loosen the nut located under the bracket and tighten it to prevent the bracket from breaking under excessive force. 4. When in low-power mode, the red indicator light will remain on for an extended period without intervention, and the battery will automatically charge when fully charged. 5. If the camera stops working completely, the battery may be depleted. In daylight, it will return to low-power mode and function again after being recharged. Start by fully covering the solar panel or placing it face down on the work surface, then press and hold the power button for 3 seconds to turn on the light. Once on, switch to operating mode 1. Each press of the button changes the operating mode and the light flashes simultaneously: Long press for 3 seconds: on/off. Short press: mode change. Mode 1: flashing red light only (energy-saving mode). Mode 2: flashing red light + induction light at night (automatically turns off when people move away after 30 seconds). Mode 3: flashing red light + induction light at night + rotation (same as mode 2). Low battery mode: If bad weather or prolonged use results in insufficient battery voltage, the red light will remain on for an extended period, and the other functions will shut off to enter low battery mode. When the weather is fine and the solar panel receives enough light to recharge the battery, it reverts to the previous mode and resumes operation. Switching modes: 1: Press and hold for 3 seconds to turn on/off. 2: Press briefly to switch between modes after powering on. In mode 2, when a human body is detected, the red light + the sensor light will flash, then automatically turn off 30 seconds after the person leaves. ERWEY Solar Simulated Camera with Motion Detector Push Button Mode Setting Mode 2: Flashing red light + sensor light on