Single-phase AC 220V 90W asynchronous geared motor, adjustable deceleration speed (5000 rpm)

Features:

1. Gear motors are mainly used to reduce speed in a series of gears, which in turn creates more torque.
2. AC 220V 90W high torque, reversible and adjustable speed.
3. Low vibration, low noise, and high-quality motor.
4. High speed and energy saving, superior performance.
5. Suitable for the packaging industry, machine tool industry, transportation equipment, textile machinery, automatic welding machines, automotive industry, elevator machinery, etc.

Specifications:

Features:
Gear motors are mainly used to reduce the speed in a series of gears, which in turn creates more torque.
AC 220V 90W high torque, reversible and adjustable speed.
Low vibration, low noise, and high-quality motor.
High speed and energy saving, superior performance.
Suitable for the packaging industry, machine tool industry, transportation equipment, textile machinery, automatic welding machines, automotive industry, elevator machinery, etc. Specification:
Model: M590-502
Material: Metal
Weight: 5250g/185.2oz
Product Type: Single-Phase Asynchronous Motor
Number of Poles: 4 Poles
Rated Power: 90W
Rated Voltage: 220V AC 50/60Hz
Gear Ratio (Optional): 5k 10k 20k 50k 100k
RPM (rpm): 280 140 70 2814
Maximum Torque (Nm)2.585.1610.320.020.0
Package List:
1 x 90W Timer Machine
1 x Governor
Note:
Please note that the new and old types of this product will be sent randomly, and make sure you don't mind before ordering.

How to Use:

About Speed: Refer to the speed reduction ratio chart and select the most common RPM for your area. When the speed motor is not under load, the motor can be continuously adjusted; the speed can be slowed down from maximum speed to 0. But when the motor is under load on the equipment, please pay particular attention to: Condition 1: If the load is low and the motor is not running continuously for a long period, the speed controller should not be set below 50% of full speed. Condition 2: If the load is high and the motor is running continuously for a long period, the speed controller should not be set below 70% of full speed.