Single-phase energy calculation 5 80A 230v 50hz single-phase energy adjustment calculations, rail mounting calculation dds015, metro watt (230v 5 80A 50hz)

Explanation: The instrument features high reliability, small size, light weight, attractive appearance, advanced technology, and a standard 35 mm rail guide. Widely used energy meters are suitable for measuring active single-phase AC energy at a nominal frequency of 50 Hz and are used for coil mounting. A single-phase energy meter can measure Electrical energy measurement and clear display on the backlit LCD screen A single-phase energy meter has the advantages of good EMI protection, low power consumption, high accuracy, high overload capacity, high stability, long service life, and high lifespan. Please display the temporary power meter reading on the top line, which can be reset. The following line displays the total energy consumption and cannot be erased. Operating environment - suitable for environments with a temperature of -25 ~ 55 °C and a relative humidity below 95%. The air does not contain corrosive gases and avoids dust, mold, salt fog, condensation, insects, etc. Specification: Model: DDS015 Rated Voltage: 230V AC Rated Current: 5-80A Load Capacity: 0.05lb at IMAX (direct access) Data Display: LCD Display Power Indicator: Green Power Pulse Indication: Red Light (approximately 80ms with tap signal) Installation Mode: 35mm Rail Working Environment: -25°C ~ 55°C, ≤ 95% RH Size: 35 * 65 * 100mm / 1.38 * 2.56 * 3.94in Package Weight: Approximately 158g / 5.6oz Package List: 1 * Electric Energy Meter The electric energy meter measures Positive active electrical energy is measured and clearly displayed on the backlit LCD screen. Two rows of LED displays: the top row shows a temporary power meter that can be reset. The next row displays the total energy consumption and cannot be erased.