Single-Phase Energy Meter 5-80A 230V 50Hz Single-Phase Energy Meter with LCD Backlight, kWh Meter DIN Rail Mount DDS015, Watt/kWh Meter (230V 5-80A 50Hz)

General Description

This single-phase energy meter is designed to measure active alternating current electricity at a nominal frequency of 50 Hz. It is distinguished by its high reliability, small size, light weight, and attractive design. This model, mounted on a standard 35 mm DIN rail, is ideal for fixed indoor installation. Thanks to its backlit LCD screen, it clearly displays the positive active power consumption.

Technical Specifications

• Model: DDS015
• Rated Voltage: 230V AC
• Rated Current: 5-80 A
• Load Capacity: 0.05 Ib Imax (direct access type)
• Data Display: LCD screen
• Power Indication: Green light
• Electrical Power Pulse Indication: Red light (illuminates for approximately 80 ms during a sampling signal)
• Mounting Method: 35 mm DIN rail
• Operating Environment: -25 ~ 55 °C, relative humidity below 95%
• Size: 35 * 65 * 100 mm / 1.38 * 2.56 * 3.94 in
• Weight: Approx. 158 g / 5.6 oz

Other Information

• Extended lifespan with good anti-electromagnetic interference and low power consumption.
• Two LED display ranges: The upper range shows temporary power consumption and can be cleared, while the lower range indicates total power consumption and cannot be cleared.
• Operating Conditions: Avoid environments containing corrosive gases, dust, mold, salt mist, condensation, and insects.