Sink Drain NonOverflow AntiClog Bathroom Wash Basin Drainer Stopper Accessory Antique(Flap with Hole )

1、The drain plug is made of brass, and the tail pipe uses stainless steel material, which is durable.

2、The polished brass finish has good gloss and can resist daily scratches and corrosion.

3、Non‑overflow drainage components are widely used in bathroom and kitchen wash basins.

4、With hardware and soft silicone gasket, please make sure the gasket is in the correct position to avoid leakage.

5、Wash basin sink drainer, easy to install and can keep the drainage smooth and avoid blockage.

Item Type: Sink Drain

Material: Brass, Stainless Steel

Color: Antique

Process Treatment: Electroplating

Drain Hole Diameter: Approx. 3cm / 1.2in

Form: British Sewer

Type: Flap Type

Weight: Approx. 237g / 8.4oz

Size: Approx. 19x6cm / 7.5x2.4in

Installation

1. Take out the head of the drainer first, and gently put it into the sink drain hole

2. After leveling and volume, as shown in the figure above

3. Then put the ring pad at the bottom, screw on the fixing nut, and tighten it with a wrench

4. After fixing the drainer as shown above, the drain installation is complete, just connect the upper and lower water pipes

1 x Sink Drain

1 x Protective Cover