Sink drain without overflow, Click-clack drain, Sink drain seal, Brass sink drain, Bathtub drain, Black

This sink drain is made of stainless steel and brass, which effectively prevents rust and corrosion caused by household wastewater and oil stains, ensuring a long service life. Our sink drain set without overflow comes with two high-quality, soft, and durable double-seal silicone gaskets, offering superior sealing performance to prevent water leaks. The click-clack drain closes and opens the valve in one second! A single press seals and quickly stores water at the bottom, then clicks to drain, and the pop-up drain pipe will rapidly expel water. 10% faster than traditional drains. No tools required, just a few steps to complete the installation. It is designed for sinks without an overflow, and the drain tap has a standard G1¼ inch connection. It fits most standard-sized wall-mounted, countertop, and undermount sinks, and European plumbing. This black sink drain is suitable not only for home use but also for various bathrooms and restrooms, such as hotels, bars, and restaurants. Modern waste disposal for sinks without overflow holes. By pressing the valve, you can close the sink outlet to retain water, and by clicking it again, you open the outlet and drain everything. Specification: High-quality material: brass and zinc alloy. Overflow: no overflow. Net weight: 0.2 kg. TIP: If the sink does not have a hole in the ceramic side under the faucet (i.e., no overflow), then a drain valve with a drain is necessary. Advantages: Corrosion protection, prevents water leaks, anti-clogging (hair clogging), easy to install (upgrade design), suitable for all standard sinks and basins. Fitting size: G1 1/4 click-clack waste, sink waste without overflow, sink plug, matte black design. The elegant matte black waste is a stylish accessory in a modern bathroom and is therefore the finishing touch. Easy to clean: The top pressure cap of the assembly can also be easily unscrewed for cleaning. 100% leak-proof: 2 silicone seals and 1 sturdy brass nut increase the drain's watertightness. Place the top washer over the sink drain hole. Insert the drain pipe into the sink. Place the thicker washer and nut connection onto the threaded part. Tighten the locking nut connection.