1/4
Small fan for wood stove with double motor and 8 aspas, silent and eco-friendly, ideal for gas, pellet and wood stoves, with thermometer, accessories for chimney and stove.
Of which environmental contribution £0.01 including VAT.
Sold by LinzGain Sarl
You may also like
Compare with similar items
Product information
Description
- Sin aire caliente. The double motor fan for the wood stove is the most efficient way to circulate the hot air around the stove. Use it extensively for wood stoves, gas, pellets and other types of stoves. The magnetic thermometer controls the operating temperature to guarantee the safety of the appliance.
- No batteries or red electricity are required: the thermoelectric module acts as a small generator to power the fan motor. The base and base of the fan is made of anodized aluminum, a material resistant to corrosion and damage with good thermal conductivity. Quietly and efficiently, it distributes heat throughout the home and raises the temperature silently, increasing the circulation of the hot air for greater convenience and reducing energy consumption. integrated into the base of the fan of the stove, raise the edge of the fan slightly when the maximum operating temperature is raised to protect the motor and the thermal module.
- It operates silently and distributes heat throughout the home and increases the temperature silently, increasing the circulation of the hot air for greater comfort and reduction of light consumption.
- The recommended surface temperature is between 70 °C and 340 °C. If the fan does not turn on until the desired temperature is reached, the impulsor will be turned on (do not touch it directly with your hands). The maximum temperature that the product supports is between 350 °C and 400 °C. This high temperature could damage the engine. Compruebe la temperatura de los combustion gases antes de comprarlo y segureze de controlar las varaciones de temperatura during el uso.
Features
- BrandLIIYIELA
- Width1 cm
- Height1 cm
- MaterialAluminium
- ColourBlack
You are here:


















