Smart wifi switch, home switch, mobile remote control, 3 synchronization modes for electrical appliances (40 A)

MULTIPLE FUNCTIONS: Define the state of ignition/discharge of the device in different scenarios and monitor the shape of the current state of the electrical charging devices.

VIDA IN SMART CASE: You can monitor and control the use of all electrical appliances and program the remote control to keep your life more intelligent. when sales of work, you can configure the conditioned air so that it is activated in anticipation or configuring other equipment.

PREMIUM MATERIAL: The cobre has good conductivity; Material ignitor PA66, high temperature resistance, improves safety during use. use.

DIN power switch Remote lighting switch Bipolar switch Intelligent switch module Wi-Fi smart relay switch Home wireless switch Block button switch

How to use:
Description of the illumination:
1. The LED indicator shows a bright blue light, which indicates that the switch is on.
2. The LED indicator is disabled, which indicates that the switch is disabled or in red mode. (In non-connected mode, the manual switch does not have a status indicator; for favor, it is used with instructions).
3. The LED indicator will turn slowly in blue, which indicates that the product is in the installed mode.
Steps:
1. Connect the cable to the upper end of the switch to the At the lower end, ensure that the cable is correct and that the Wi-Fi signal is weak.
2. Activate Bluetooth and Wi-Fi on your phone, turn on the application and keep the ignition button pressed. Expect approximately 5 to 10 seconds; The LED indicator will slowly turn blue.
3. After waiting for a moment, an emerging window will appear. Click on the + button next to the next one, select the device button and hope to recognize the device.
4. Enter the opposite of your Wi-Fi cue, click on the next button and hope. Connection of red.
5. Connect to the red.

Specifications:
Type of article: Disyuntor of riel DIN
Material: Cobre, PA66
Application: Intelligent control
Color of the panel: Negro
Applicable application: For intelligent elevator
Nominal voltage of operation: 230 V AC
Type of control: Control remoto, manual
Number of poles: 1P+N (N pasante)
Control method: Para SigMesh/Para ZigBe
Riel: DIN35
Tamaño: Aprox. 82 x 68 x 18 mm/3.23 x 2.68 x 0.71 inches

Package list:
1 x DIN power switch