Socket Mold for Dual Cavity Butt Connectors 16-14 AWG - For Automotive and Boat Electrical Wiring

Features:1.Aluminum Alloy Material: The butt connector mold is made of premium aluminum alloy, ensuring long-lasting performance and reliability, even in harsh environments.
2.Reusable Design: The butt connector mold can perform repeated, weatherproof connections, effectively protecting your 1-to-1 or 1-to-2 wire butt connections from harsh environments.
3.Wide Application: The butt connector mold is suitable for various electrical, automotive, and marine applications, allowing you to quickly achieve a weatherproof seal.
4.Improve Safety: Ensure safe and reliable electrical connections, minimizing short circuits and electrical faults.The mold is designed to withstand harsh environmental conditions and can repeatedly produce watertight, weatherproof butt joints.
5.Easy to use: The double-cavity mold can be used with a sealant rod and a professional hot-melt glue gun to easily produce weatherproof butt connectors.Compact and portable, easy to store and transport, suitable for mobile projects and limited workspaces.
Specifications:Item Type: Butt Connector Mold
Material: Aluminum Alloy
Mold Specifications: 16-14AWG (16-14ga)
Feature: Weatherproof, corrosion-resistant, easy to use
Note: Please brush off the oil before use. Motor oil and cooking oil are acceptable. This prevents the adhesive from sticking to the mold and making it difficult to remove. Use a flame-retardant adhesive.

How to Use:1. Strip the wire ends: Strip the ends of the wires and insert them into the butt connector. 2. Connect the flanged wire to the butt connector: Use a crimping tool to secure the wire in the butt connector. 3. Place the spliced ​​wire in the mold: Spray a lubricant treatment on the mold, insert the spliced ​​wire in the center of the mold, secure the pin in the center position, close it, and tighten the mold. 4. Inject the sealant through the mold's filling port: Inject the sealant through the filling port and wait 30 seconds. Next, open the mold and complete the final sealed connection.
Package List:Package includes 1 x butt connector mold (lower and upper)
Note:Please brush off the oil before use. Motor oil and cooking oil are acceptable. This will prevent the adhesive from sticking to the mold and making it difficult to remove. Use a flame-retardant adhesive.