Solar charge controller, dual LCD screen, USB, 12V 24V, MPPT 100A

General Description This MPPT solar charge controller is designed to optimize the charging of 12V and 24V batteries from 18V to 36V solar panels. It offers high accuracy thanks to its industrial-grade main chip and real-time display of charging parameters. Technical Specifications Condition: 100% Brand New Material: ABS Options: 40A, 50A, 60A, 100A Battery Voltage: 12V/24V Auto Solar Panel Voltage: 12V, 18V, 24V, 36V Float Charge: 13.7V (adjustable) Discharge Cut-off: 10.7V (adjustable) Discharge Reconnect: 12.6V (adjustable) Self-Consumption: <10mA USB Output: 5V / 2A maximum Installation Install the controller as close as possible to the battery to avoid voltage drop due to excessively long wires. Ensure the battery has sufficient voltage for the controller to recognize the correct battery type during initial installation. This controller is compatible with various lead-acid batteries, including flooded, sealed, and gel batteries. For other battery types, it is necessary to understand their specifications and set the appropriate charging parameters. Use only photovoltaic panels as the charging source; do not use direct current or other power sources. The controller may generate heat during operation, so it is important to install it on a flat, suitable surface. Other information