1/4

Solar charge controller, dual LCD screen, USB, 12V 24V, MPPT 100A

~~£112.50~~

Of which environmental contribution £0.10 including VAT.

Sold by Sinocor GmbH

Product information

Description

General Description

The solar charge controller is designed to optimize battery charging using solar panels. It supports 12V and 24V systems, with a charging capacity of up to 100A. Thanks to its MPPT technology, it ensures high charging efficiency and automatic monitoring of charging conditions.

Technical Specifications

Material: ABS
Current Options: 40A, 50A, 60A, 100A
Battery Voltage: 12V/24V automatic
Solar Panel Voltage: 12V, 18V, 24V, 36V
Float Charge: 13.7V (adjustable)
Discharge Stop: 10.7V (adjustable)
Discharge Reconnect: 12.6V (adjustable)
Self-Consumption: <10mA
USB Output: 5V / 2A maximum

Compatibility and Accessories

Compatible with various lead-acid batteries (open, sealed, gel, etc.)
Includes: 1 x controller, 1 x user manual

Installation

For optimal installation, it is recommended to place the controller as close as possible to the battery to avoid voltage drops due to excessively long wires. Also, ensure that the battery has sufficient voltage for the controller to recognize the correct battery type.

Operation

This controller should only be used with photovoltaic panels as a charging source. Avoid using DC or other power sources. Note that the controller may generate heat during operation, so it is advisable to install it on a flat, good-quality surface.

Other information

Features

Brand
TEHTUY
Warranty
1 year(s)
Amperage
1 A
Material
Acrylonitrile butadiene styrene (ABS)
Weight
100 g

Advice from

Wind turbine buying guide

Interest in domestic wind turbines in the UK increases year after year. Ideal for a countryside home, but trickier to set up in a city, wind turbines can be a great way to get into renewable energy and off-grid energy production. Read on to find out more about installing a wind turbine for more sustainable living.

Read our guide

You are here: