1/4

Solar charge controller, dual LCD screen, USB, 12V 24V, MPPT 100A

~~£120.48~~

Of which environmental contribution £0.01 including VAT.

Sold by Sinocor GmbH

Product information

Description

General Description

This MPPT solar charge controller is designed to optimize the charging of 12V and 24V batteries from 18V to 36V solar panels. It offers high precision thanks to its industrial-grade main chip and real-time display of charging parameters.

Technical Specifications

Condition: 100% Brand New
Material: ABS
Options: 40A, 50A, 60A, 100A
Battery Voltage: 12V/24V Auto
Solar Panel Voltage: 12V, 18V, 24V, 36V
Float Charge: 13.7V (Adjustable)
Discharge Stop: 10.7V (Adjustable)
Discharge Reconnect: 12.6V (Adjustable)
Self-Consumption: <10mA
USB Output: 5V/2A maximum

Installation

Install the controller as close as possible to the battery to avoid voltage drop due to excessively long wires.
Ensure the battery has sufficient voltage for the controller to recognize the correct battery type during initial installation.

Usage

This controller is compatible with various lead-acid batteries, including flooded, sealed, and gel batteries.
For other battery types, it is necessary to know their characteristics and set the appropriate charging parameters.
Use only photovoltaic panels as a charging source; Do not use direct current or other power sources.
The controller may generate heat during operation, so it is important to install it on a flat, good-quality surface.

Other Information

Features

Brand
TEHTUY
Voltage
24 V
Amperage
1 A
Material
Acrylonitrile butadiene styrene (ABS)
Type of solar charge controller
MPPT

Advice from

Wind turbine buying guide

Interest in domestic wind turbines in the UK increases year after year. Ideal for a countryside home, but trickier to set up in a city, wind turbines can be a great way to get into renewable energy and off-grid energy production. Read on to find out more about installing a wind turbine for more sustainable living.

Read our guide

You are here: